PocketWizard FlexTT6 Transceiver for Canon

Take complete control over your wireless radio flash system with the FlexTT6 Transceiver from PocketWizard. Compatible with PocketWizard radio and with support for Canon's latest cameras and flashes, this E-TTL / E-TTL II compatible transceiver will open the door to advanced off-camera lighting techniques. As a combination transmitter and receiver, the FlexTT6 can function as both an on-camera master or as a remote slave, and it features a hot shoe on the top for using a flash both on-camera and off. Also, it enjoys PocketWizard's ControlTL technology for both wireless TTL and Manual Power Control settings when working.

The FlexTT6 utilizes a standard 340-354 MHz frequency with access to 52 channels that make it less susceptible to interference. It also provides a maximum range of 800' when using TTL or 1200' when operating as a simple trigger. Users can work without line-of-sight and they will have access to features such as HyperSync and high-speed sync for shooting at shutter speeds up to 1/8000 second. Along with this, the Canon model has optimized performance for rear curtain sync. Beyond flashes, shooters can use the FlexTT6 to trigger cameras as well as larger studio strobes via the two 3.5mm sync ports. Additionally, it will run on two AA batteries and features a mini-USB port for future firmware updates.

This item is FCC compliant and can only be used with corresponding USA FCC compliant models. Using this item outside of the United States may be illegal. B&H is not responsible for any fines, fees, or penalties that may come from inappropriate spectrum usage.

ControlTL works with Canon's E-TTL / E-TTL II system to provide full TTL support with the latest cameras and flashes. It also provides the option for Manual Power Control for up to three zones as well as PowerTracking for automatic changes. Another benefit is an optimized High Speed Sync mode for shooting at shutter speeds up to 1/8000 second. Additionally, the Canon model has an optimized rear curtain sync method.

HyperSync technology uses advanced processing to enable faster sync speeds without requiring TTL and dedicated high-speed sync technologies.

A Pre-Flash Boost setting will help compensate for light loss over distance or through diffusion to help the camera accurately meter.

The FlexTT6 is compatible with all PocketWizard radios that operate with a 340-354 MHz frequency.

Users will enjoy a range of up to 800' when using TTL or up to 1200' when used as a basic trigger. This is assisted by a 2.7" rubberized antenna that can be tilted 180° for optimal positioning.

A basic trigger mode is available for use with other brand cameras and for simple manual operation.

Auto-sensing technology allows it to automatically switch between operation as a transmitter or receiver.

An Auto-Relay mode is available for triggering a remote camera as well as remote flashes.

A mini-USB port is available for using the PocketWizard Utility to install firmware updates.

Shoot at speeds within 1 fps of the camera's max fps when using TTL or at the camera's max fps when in basic triggering mode.

Compatible Cameras

Canon: 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 1D X Mark II, 1D X, 1D Mark III, 5DS, 5DS R, 6D, 7D Mark II, 80D, 77D, 70D, 60D, 7D, T7i, T6, T5, SL1, XSi

Compatible Flashes

Canon: 600EX II-RT, 600EX-RT, 430EX III-RT, 430EX II, 430EX, 580EX II, 580EX