Phoxene Dome for Briese 1.2 -2.5kW or 4kW
There are 2x power options please choose your model from the drop-down list above
1.2 -2.5kW or 4kW
Domes in glass don’t tolerate violent shocks. Many of these glass dome break because the head falls, or during transport. Due to the heat emitted by still arc lamps, the protective dome can also break because of internal tensions inside the glass.
Have your Briese arc lamp dome repaired by Phoxene
When a Briese arc lamp dome breaks, Peartree Photo can replace it with a Phoxene glass. You just need to send us the original metal parts (the metal rim, and the top protective grid) and we will glue a glass cylinder on it. This is a cost-effective and efficient alternative to buying a new one. Please take care that the metal parts are in good conditions – We can’t supply you with any, and can’t repair them if deteriorated.
Repair with high-quality components
The cylinder we use is made of Pyrex and has been treated to be heat resistant. Thus, it will be less likely to break because of internal tensions due to the heat generated by the arc lamp.
The cylinder is colour-corrected, to get a light output close to 5500°K.
The glue is a special silicone mastic, able to withstand up to 1000°C before deteriorating – Far over the temperature generated by the arc lamp!